PWM Solar Charger Controller 30A

QR code
Model Sohigh PCB-30A
Brand Sohigh Solar
Voltage(V) 12/24V
Product Origin Guangzhou,China
Capacity 30A
Product DetailParameterDatasheet


Feature of the PWM solar charger controller


INTELLIGENT DISPLAY: The solar controller comes with a LCD display that can clearly indicate the status and data, such as digital display, current, voltage, load identification, battery identification, charging identification, etc. it can be conveniently switched modes and parameter configurations.


MULTI-PROTECTION: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. PCB circuit board, Waterproof:IP32


20A/12V & 24V: handles up to 30A of array current, keeps 12 or 24 volt batteries properly charged, PWM charging model. Best choice for green energy.


NOTE: Charge controller can only use the photovoltaic panel as a charging source. Do not use a DC or other power source as a charging source. Only suit for lead-acid batteries! The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order. The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place.


The circuit board inside the controller adopts high-quality conformal coating to protect the circuit board from environmental erosion. After curing, it forms a transparent protective film, which has excellent insulation, moisture-proof, anti-leakage, shock-proof, dust-proof, anti-corrosion, anti-aging, corona resistance and other properties.




Model :

Sohigh PCB-20A

Sohigh PCB-30A

Rated Charge Current

20A

30A

Voltage Range of Battery

8V-32V;32V-64V

   Max Open Voltage of Solar Panel

50V;100V

System Rated Voltage

12/24V Auto Rocognized

   Temperature compensation coefficient

4mV/℃/2V(25℃)

Operating Temperature

-20℃~+55℃(to run at full rated current continuously)

Storage Temperature

’-30℃~+80℃

Working Humidity

95%,no condensation

   Photovoltic module utilization ratio

≤10mA; 13mA

IP code

IP30

Wiring

PCB PCB terminal, I<10mm'

Battery Type

GEL,SLD,FLD and Usr (default)

USB

5V/1A

Man-machine interface

LCD,2 Buttons

Light control voltage

5V(1V~10V)X1/X2/X3/X4

Charge loop voltage drop

0.21V

Man-machine interface

0.10V

PV voltage

≤50V

Charging mode*

PWM Multi-stage(bulk,float,absorption,equalized)

Load working mode

Regular control mode;

Light control with switch-off point at night and switch-on point before dawn

Light control mode








PWM Solar Charge Controller Datasheet-Sohigh Solar.pdf


Get In Touch

undefined  

www.sohighsolar.com

undefined   Email: sohigh@sohighsolar.com
undefined   Tel/Whatsapp/Wechat: +86-136-6893-6561
undefined   Address:Room 2801, Room 2802-2, Block B,Tianxiu Building,Guangzhou,Guangdong

Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

WhatsSpp-TellenTellen 二维码.jpg
WhatsAppWechat